SanDisk X300 128GB SATA 6Gb/s MLC NAND mSATA Solid State Drive - SD7SF6S-128G

Please Call
Warranty3 Years
AvailabilityShips In 3 to 5 Days
SeriesSanDisk X300
UPC Code619659126001

Product Specs

Product Specs
Capacity128 GB
Cache BuffernCache 2.0 Tiered Caching
Flash Type1Ynm Mode NAND Flash Memory Multi-Level Cell (MLC)
Interface ConnectormSATA
Interface SpeedSATA III 6Gb/sec
Max Sequential ReadUp to 520MB/sec (Crystal Disk Mark)
Max Sequential WriteUp to 450MB/sec (Crystal Disk Mark)
4K Random ReadUp to 73
4K Random WriteUp to 40
SSD Endurance65 TBW
Life Expectancy1
Shock Resistance1500G
Ecc RecoveryNot Specified
Rohs CompliantYes
Form FactormSATA (Full Size)
Dimensions50.80mm x 29.85mm x 3.82mm
ControllerMarvell 88SS9188 Controller
EAN CodeDoes Not Apply
Power Consumption2

Key Features

  • Fast Start-Up
Based on state of the art 1Ynm X3 flash technology, the SanDisk X300 SSD delivers performance with high reliability and low power. It features nCache 2.0, the next generation SanDisk tiered caching technology, designed to improve SSD responsiveness for most corporate and consumer workloads. The X300 is highly versatile and can accommodate a wide range of computing platforms. It is available in 2.5-inch/7mm cased, M.2 2280, and mSATA form factors with capacities of 128GB, 256GB, 512GB, and 1TB. nCache 2.0 uses a combination of SLC and X3/TLC flash blocks to improve endurance, increase efficiency, and boost performance. By first writing all of the data to SLC blocks, the write amplification on the X3 blocks is minimized. The X300 SSD also includes a new and robust on-the-fly error handling mechanism called DataGuard Client. It uses page level striping with distributed parity for an added layer of data protection and can recover errors that other traditional error correction mechanisms cannot. The X300 utilizes a SATA DEVSLP low-power mode to minimize its power consumption during idle periods. DEVSLP enables the SSD to completely shut off its SATA PHY, thus resulting in much lower power consumption compared to SATA Slumber. This increases the amount of usable hours per battery charge, which is essential for modern mobile devices. SanDisk SSDs can improve total cost of ownership (TCO) by reducing downtime due to hard drive failures. They also offer lower latency and greater read/write speeds over traditional HDDs. IT departments can extend the useful life of their PC inventory by upgrading the HDDs to the X300 SSD, thus prolonging replacement cycles and maximizing asset value.
Write Your Own Review
You're reviewing:SanDisk X300 128GB SATA 6Gb/s MLC NAND mSATA Solid State Drive - SD7SF6S-128G