Seagate BarraCuda 120 250GB SATA III 6Gb/s 3D TLC NAND 2.5" 7mm Solid State Drive - ZA250CM10003

$69.00
SKU
2.5SSD-ZA250CM10003
ConditionNew
Warranty5 Years
AvailabilityIn Stock
ManufacturerSeagate
ModelZA250CM10003
SeriesSeagate BarraCuda 120 SSD
UPC Code763649139240

Product Specs

Product Specs
Capacity250 GB
Cache BufferDynamic SLC Caching
Flash TypeToshiba/Kioxia BiCS4 96-Layer or MICRON 64-Layer 3D TLC NAND (Tri Level Cell)
Interface ConnectorSATA (7-Pin Signal and 15-Pin Power Connectors)
Interface SpeedSATA III 6Gb/sec (Compatible with SATA II 3Gb/s & SATA I 1.5Gb/s Interfaces)
EncryptionNo
Max Sequential ReadUp to 560 Max, MB/sec (128KB Crystal Disk Mark)
Max Sequential WriteUp to 540 Max, MB/sec (128KB Crystal Disk Mark)
4K Random ReadUp to 90,000 (Max, IOPS) 4KB QD32 T8 (Crystal Disk Mark)
4K Random WriteUp to 90,000 (Max, IOPS) 4KB QD32 T8 (Crystal Disk Mark)
SSD Endurance150TBW (Total Bytes Written)
Life Expectancy1.8 Million Hours (MTBF Mean Time Between Failures)
Shock Resistance1500Gs / 0.5ms
Ecc RecoveryLDPC Error Correction (Low Density Parity Check)
Rohs CompliantYes
Form Factor2.5 Inch
Dimensions(L x W x H) 100.35mm x 70.10mm x 7.10mm
ControllerPhison ES12 Controller
EAN CodeDoes Not Apply
Power ConsumptionActive Power 2.5W (AVG) / Idle Power PS3 116mW (AVG) / Low Power 5mW (AVG) L1.2 mode
ClassificationConsumer

Key Features

  • Fast Start-Up, Loading and File Transfers
  • SATA 6Gb/sec Performance SSD for Client PCs
  • Phison ES12 Controller
  • Toshiba/Kioxia BiCS4 96-Layer or MICRON 64-Layer 3D TLC NAND (Tri Level Cell)
  • Intelligent SLC Caching Technology
  • Shock and Vibration Resistant
  • Low Power Consumption
  • Endurance with up to 1170 TBW
  • Thermal Throttling Technology
  • Bad Block Management Technology
  • Wear Leveling Technology
  • Built for Laptops, Home Servers, Gaming PCs and All-in-One PCs

Seagate BarraCuda 120 is a fast 2.5-inch SATA SSD that features a next-generation controller combined with the latest 3D TLC NAND technology to provide increased dependability and speed for PC upgrades. With a 2.5", 7mm form factor, this Seagate BarraCuda 120 2.5" Internal SSD has a max sequential read speed of up to 560 MB/s and a max sequential write speed of 540 MB/s. This SSD utilizes the SATA III 6 Gb/s interface. This SSD also has a MTBF of 1.8 million hours, SMART and TRIM support, and is covered by a limited 5-year warranty. Download Seagate's SeaTools SSD software to take advantage of the drive's performance reporting, S.M.A.R.T. attributes, health monitoring, firmware updates, diagnostics, and managing logs.

Write Your Own Review
You're reviewing:Seagate BarraCuda 120 250GB SATA III 6Gb/s 3D TLC NAND 2.5" 7mm Solid State Drive - ZA250CM10003