Fujitsu MHR2-AT Mobile HDD - 50.0GB 4200RPM Ultra ATA-100Mb/s 2MB Cache 2.5" 9.5mm Laptop Hard Drive - MHR2050AT


Warranty1 Year Warranty

Back Ordered

ManufacturerFujitsu Corporation
SeriesFujitsu MHR2-AT Mobile HDD
UPC CodeDoes Not Apply

Product Specs

Product Specs
Capacity50.0 GB
Spindle Speed4200 RPM Fluid Dynamic Bearing (FDB) Motor
Cache Buffer2 MB Intelligent Caching
Advanced FormatNo - 512 Sector Size (Bytes)
Form Factor2.5 Inch Internal Hard Drive
InterfacePATA (EIDE Ultra-DMA ATA-6)
Interface SpeedUltra DMA Mode-5 - ATA-5 100MB/sec
Data Transfer Rateup to 100MB/sec Host to/from Drive (Sustained)
Interface ConnectorPATA (44-Pin Signal/Power and 4-Pin Jumper)
Recording TechnologyPerpendicular Giant Magnetoresistive Recording (GMR) Technology
Life Expectancy20,000 Power On Hours (POH) / 5 Years Component Design Life
Workload Rating300,000 Hours MTBF (Mean Time Before Failures) / 300,000 (Load/Unload Cycles)
Shock ResistanceOperating: 200Gs / 2ms - Non Operating: 900Gs / 1ms (half sine wave)
EncryptionNo - Standard Model
Rohs CompliantYes
Dimensions(L x W x H) 100.0mm x 70.0mm x 9.5mm
Part NumberCA06062-B052
ClassificationMainstream Drives

Key Features

  • Capacities up to 60.0GB
  • 4200 RPM Spindle Speed Motor
  • MTBF of 300,000 Hours
  • Read Ahead Caching Technology
  • Low Power Consumption
  • High Shock Tolerance
  • Ultra Quiet Intelligent Seek Technology
  • Closed Loop Actuator Servo with Auto Lock
  • Revolving Voice Coil Motor (VCM) for Actuator
  • Advanced Power Management Technology
  • Ramp Loading and Drive Stabilization Technology
  • Perpendicular Giant Magnetoresistive Recording (GMR) Technology
  • Read Multiple and Write Multiple Command Support
  • Thermal Fly Height Control (TFC) Technology
  • Full-Track Multiple-Sector Transfer Capability
  • On-the-Fly Error-Correction (ECC) Technology
  • Multi Zone Recording Technology
  • Whisper Quiet with Fluid Dynamic Bearing (FDB) Motors

Fujitsu MHR2-AT Mobile HDD Series

The Fujitsu MHR Series, 2.5-inch disk drives feature the latest technology, performance, capacity and reliability you need for today’s fast growing mobile computing requirements.

No other supplier can offer the level of design breakthroughs featured on the Fujitsu MHR Series disk drives. From significant advancements in head and media technology to lower power consumption capabilities and extreme ruggedness and reliability, there is simply no match for the MHR Series disk drive in Mobile computing applications.

Impressive Capacity and Performance in a Mobile Drive - Today’s demanding mobile users expect disk drives to be extremely compact while offering incredible performance and capacity. The Fujitsu MHR Series disk drives deliver both without sacrificing efficiency or reliability.

High areal densities of 36.4GB/in, combined with GMR heads and MEEPRML read channel technologies, enable these large-capacity drives to deliver outstanding performance. The Fujitsu MHR Series drives incorporate FDB spindle motors and Rampload in 2.5” disk drives for mobile applications. The FDB technology dramatically improves non-operating shock tolerance and decreases acoustic noise.

In addition, as part of Fujitsu’s environmental philosophy and a tangible result of its “Green Life 21” initiative, the MHR Series is produced using lead-free solder, the first 2.5” HDD series to be manufactured by this process.

With these technology benefits, Fujitsu sees the MHR Series as a stand-alone product in its class. With capacities of 10GB, 20GB, 30GB, 40GB, 50GB and 60GB, these drives are big enough to hold large multimedia presentations, fast enough to run them, and small enough to fit in today’s compact mobile computers, notebooks and consumer electronic devices

Intelligent Power Management Helps Maximize Battery Life - The Fujitsu MHR Series disk drives feature Fujitsu’s intelligent power management technology, which maximizes battery life for mobile computing devices by efficiently regulating the drive’s power requirements to as low as 0.1 Watt in sleep mode.

High Shock Resistance - The MHR Series disk drives are durable enough to withstand greater than 900G non operating shock by offering a number of features designed to resist shock and increase reliability. The MHR Series stiffness-reinforced base casting delivers enhanced stability for greater vibration and shock resistance. The MHR series’ repeatable run-out compensation feature adjusts for minor mechanical “disk shift” by automatically performing diagnostics and making adjustments each time the drive starts up.

   Key Features

  • Up to 20GB per platter data capacity offered in capacity points of 10GB, 20GB, 30GB, 40GB, 50GB and 60GB
  • Low profile 9.5mm form factor
  • New Rampload feature to improve reliability and increase shock tolerance
  • High non-operating shock tolerance of 900G delivers extreme ruggedness
  • High operating shock tolerance of 225G, 2 ms specification for highly reliable operation
  • Ultra Fast Ultra ATA/100 interface and 4,200 RPM spindle speed
  • Intelligent power management technology automatically regulates power usage as low as 0.1 Watt in sleep mode
  • Fluid Dynamic Bearing Spindle Motor for lower acoustics and increased non-operating shock tolerance

   Best Fit Applications

  • Laptops
  • Notebooks
  • Small Form Factor PC's
  • For TV and DVR Recorder
  • External Storage
Write Your Own Review
You're reviewing:Fujitsu MHR2-AT Mobile HDD - 50.0GB 4200RPM Ultra ATA-100Mb/s 2MB Cache 2.5" 9.5mm Laptop Hard Drive - MHR2050AT