Dell Precision Workstation 690 - Mini-Tower
Dell Precision Workstation 690 - Mini-Tower
Search AgainComputer Information
| Processor | Intel Woodcrest Xeon 64-bit 5100 Series |
| Memory Type | PC2-5300 667MHz DDR2 RAM 240-pin DIMM Desktop Memory |
| Installed Memory | up to 32GB |
| Max Memory | 32GB |
| Memory Slots | 8 DIMM Slots |
| Memory Size | 240 Pin |
| Original Hard Drives | Up to 250GB 7200RPM 3.5" SATA Hard Drive | Up to 500GB 10K RPM 3.5" SATA Hard Drive | Up to 300GB 10K RPM 3.5" SAS Hard Drive | Up to 146GB 15K RPM 3.5" SAS Hard Drive |
| Original Solid State Drives | Not Available at Time of Release |
| Supported Drives | Four Internal 3.5" Drive Bays + One 5.25" Drive Bay (6 SATA Connectors) |
| Drive Notes |
The Dell Precision Workstation 690 - Mini-Tower Supports up to a 5 Drive Configuration. (Up to Four 3.5" Drives in the Primary Bays + One 3.5" Drive Installed in the 5.25" Drive Bay) Note: If you are installing a fifth 3.5" drive in the 5.25" drive bay, the 3.5" drive requires a 3.5" to 5.25" drive adapter bracket for installation. (Optional - add-in PERC 5/i PCI-e RAID card support for RAID 0/1/5/10)
|
Upgrade & Replacement Options For Your Dell Precision Workstation 690 - Mini-Tower
+ Show Compatible - 3.5" SATA Desktop Solid State Drive Options
13 options
+ Show Compatible - Data Transfer / Drive Cloning Cable for 2.5" SATA Solid State Drives and Hard Drives
1 options
| DESCRIPTION | |||
|---|---|---|---|
| USB v3.0 Cable for 2.5" SATA Solid State Drives & Hard Drives - Data Transfers | Drive Cloning | Data Backups |
$14.99
|
More Info |
+ Show Compatible - 3.5" SATA Desktop Hard Drive Options
18 options
+ Show Compatible - Data Transfer / Drive Cloning Cable for 3.5" SATA & PATA Hard Drives
1 options
| DESCRIPTION | |||
|---|---|---|---|
| USB v2.0 to SATA / IDE Combo Adapter for 2.5" and 3.5" SSD/HDD Data Transfers |
$65.00
|
More Info |